• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

No brake pressure


Chula Vista, CA
Staff member
Could be several things.

1 You didn't bleed the brakes correctly and air got into the system at the master cylinder. You'll need to re-bleed them. Make sure the master cylinder stays filled with fluid at all times while bleeding, if it isn't, you'll be sucking air into the system.

2 ABS pump has air in it. Dealer can cycle the ABS module with a scan tool to get the air out. If it's in the ABS pump, it will be hard for you to do at home.