SLICK6
Well-Known Member
Does anyone have a car jack that i could borrow? Im going to try to install lowering springs on my car this weekend and i dont have one 
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Car jack anybody?
- Thread starter SLICK6
- Start date
northerncountry
Well-Known Member
Slick 6 Give me a call 402 403 8218 I will give you a hand have you installed them before? do you have caster camber plates or caster bolts or an adjustable panhard bar?
If you need jack ect I have one and spring compresser
M
Mustangcwo
Guest
Way to jump in and lend a hand guys. You :rock:
Hey if nothing else bro lets take it to Miramar. I just did a short throw shifter on another members car.
SLICK6
Well-Known Member
i only have the springs. do i need anything else or can i just swap out the springs?
you can just swap springs. That is what I did to my car
you can use a spring compressor if you have one or can borrow one, but if you cant find one you will need 2 jacks. or a jack and 2 jack stands to do it safely. the hobby shop has all that stuff. the hobby shop on 32nd street has the small chassis lifts that lifts your car up about 2 feet. i suggest using that lift if you can. and then use your jack to lower your axle and a arms down for the new springs. i dont know if there is enough room, or not but you may have to disconnect your brakes.
If you still need help send me a PM You do not have to remove brakes to put springs on a S197. I have the spring compresser as well. Best place to do it is Miramar. I am off next two days and this weekend let me know