• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

How to Datalog with Xcal-3 using SCT Live Link 6 Part 1 of 3

wickedstangs

Chula Vista, CA
Staff member
Administrator
Ok, This is going to be part 1 of 3 how to datalog your mustangs using SCT software.

1st you will need to download Live Link Data Logging Software 6.1 <---CLICK HERE TO DOWNLOAD


Then you will hit Run.


Then Hit NEXT


I loaded it in my SCT File but you can put it anywhere you want..



Just Let it Install


It will automatically place an ICON on your desktop. Make sure before you run it. To left click and run as administrator if you are not the administrator of that computer.


This is what your Live Link 6 Data Acquistion software look like..


Part two and three:
I will show how to hook it up to your car and and how to use the LiveLink software to datalog. I will also discuss what parimaters(PIDs) you should datalog. How remote tuning and mail order tunes are becoming very acurate.
 

Renegade

Well-Known Member
i did that already, but i couldnt find the drivers download on the SCT website, do you still need to download a driver for the new software?
 

Renegade

Well-Known Member
your kidding me right? i spent an hour pissed off on the SCT website searching every inch for those damn drivers...UGH! well guess ill data log my car on wed
 
Top