No brake pressure

[John Gunter]

so after changing my brakes I have no brake pressure. Any advice?

 

[Mrs V.I. Massive]

If you already tried bleeding them I would check the master cylinder.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[John Gunter]

What could be wrong with the master Cylinder

 

[wickedstangs]

Could be several things.

1 You didn't bleed the brakes correctly and air got into the system at the master cylinder. You'll need to re-bleed them. Make sure the master cylinder stays filled with fluid at all times while bleeding, if it isn't, you'll be sucking air into the system.

2 ABS pump has air in it. Dealer can cycle the ABS module with a scan tool to get the air out. If it's in the ABS pump, it will be hard for you to do at home.

 

[John Gunter]

Thanks

 

[orange395w]

Thanks

Explain what you did and maybe we can help you a little better. Without knowing your method we cant pinpoint what you did or didn't do. It should be a simple fix unless you have a psycho jealous girlfriend cutting brake lines or something.

 

[John Gunter]

Forgot to bleed the master Cylinder. Thanks for the help

 

[AgencySeree]

Have you ever considered how far enthusiasts might go to push the limits of their Mustangs? From extreme engine modifications to unconventional aesthetics, what are some of the most outrageous changes you've seen or even tried yourself? Do you think there's a line that shouldn't be crossed in the pursuit of performance and individuality?

- use website technologies веб студия|