• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

***Construction in progress***

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
Honestly the upper control arms are a really bad idea, the stock ones are made of rubber and so they have some engineered give, when you put polyurethane uppers on they create even more bind than the stickers due. I've heard of people removing the driver side upper control arm, they call that the poor mans 3 link. Do some research on it, but I don't recommend you tracking it with those UCAs honestly, if you aren't going to get a torque arm soon from all of what I read, spherical bushing uppers might be better
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
What car is this on?
;)
Honestly the upper control arms are a really bad idea, the stock ones are made of rubber and so they have some engineered give, when you put polyurethane uppers on they create even more bind than the stickers due. I've heard of people removing the driver side upper control arm, they call that the poor mans 3 link. Do some research on it, but I don't recommend you tracking it with those UCAs honestly, if you aren't going to get a torque arm soon from all of what I read, spherical bushing uppers might be better
already has UCA, tq arm will be in the next 3 mths, depends on how much Dantes takes out of the pocket.
 

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
Awesome, if you do, save some money up for better rear brakes too, the torque arm moves the braking bias backwards some so if you upgrade your rear brakes and get a prportioning valve to set the bias it'll improve your stopping distance as well.
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
Baer brake kit is on the OP. Tires, radiator, TB, k members, control arms should be here this week. plus free mounting and balancing. If anyone needs tunes or parts for almost any vehicle, let me know.
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
Looking to get left front fender color matched to car to band aid until I save up for full paint job and ding repair. Any recomendations?



IgottaV8 check PM
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
Sunday will be washing both vics and waxing the stand and cleaning/ taking stuff apart. let me know if interested
 

Attachments

  • 13043278_10153635390286275_7264688250645696894_n.jpg
    13043278_10153635390286275_7264688250645696894_n.jpg
    108.5 KB · Views: 100
  • 13015525_10153635390306275_3512668485870900463_n.jpg
    13015525_10153635390306275_3512668485870900463_n.jpg
    96.2 KB · Views: 99
  • 12974271_10153635390331275_7833292891326991864_n.jpg
    12974271_10153635390331275_7833292891326991864_n.jpg
    89.7 KB · Views: 86
  • 12974439_10153635398966275_6355688309066922682_n.jpg
    12974439_10153635398966275_6355688309066922682_n.jpg
    74.7 KB · Views: 94

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
Environmentalists would have been upset with me today. Gave here a good bath under the hood and outside. Def Going to be saving up for a full paint job, until then will be one mean ugly duckling with swirl marks. I do want to get the fender done once she is mobile. I will start doing interior cleaning over next couple days, today was just too hot. One thing that was nice that I found was : Weight-Coupe :3391 So i think with the hood, k-members, control arms, rear seat delete, lighter seats, drive shaft should could possibly be sitting lower 3000's. Also is advertised with 16 city and 24 hwy, I know I have 3.73's instead of stock 3.27 but also have a 6 spd vs the 5 plus lighter. Also with intake exhaust and tuning could be pretty decent lol best mileage car I have owned compared to the jeeps and charger
 
Last edited:

Dusten

Well-Known Member
Donator
Board Member
Environmentalists would have been upset with me today. Gave here a good bath under the hood and outside. Def Going to be saving up for a full paint job, until then will be one mean ugly duckling with swirl marks. I do want to get the fender done once she is mobile. I will start doing interior cleaning over next couple days, today was just too hot. One thing that was nice that I found was : Weight-Coupe :3391 So i think with the hood, k-members, control arms, rear seat delete, lighter seats, drive shaft should could possibly be sitting lower 3000's. Also is advertised with 16 city and 24 hwy, I know I have 3.73's instead of stock 3.27 but also have a 6 spd vs the 5 plus lighter. Also with intake exhaust and tuning could be pretty decent lol best mileage car I have owned compared to the jeeps and charger
Depending on which 5 speed came out of the car you may not have gained much. The 03 and above t 3650 .62 to 1 overdrive ratio while the T56 out of the cobras has the same .62 overdrive ratio. The earlier t3650 did have a .68 to 1 overdrive ratio so you may have gained some there.
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
yeah has t56 with viper internals to handle more hp and cryo treated. plus my gears are 3.73, thinking about bumping it up to 4.10 but well see what numbers she puts down at dantes and how she feels
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
Called dante today as well, he said he drops the engines from the bottom and could just put the new k member on. Spoke with him for about 10 min today and followed it up with email on plans plus with the mod list so he knows what is done and what potentially is needed.
 
Last edited:

Dusten

Well-Known Member
Donator
Board Member
The viper t56 has a .5 od ratio, so the 4.10s wouldnt suck. A k memeber is a pretty easy install if youve got the shop space.
 
Top