lol
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Looks like the blown 347 might not be blown anymore.
- Thread starter blown347
- Start date
Some more scott rod stuff installed:
And K member is in
And K member is in
Here's a few updates:
Got most of the front suspension together but I discovered one of my caster camber plates is cracked. looks like the stupid body shop that did the alignment after it got hit torqued the SHIZ out of the bolts. so i have to get a new set (otherwise i could've put the car back on the ground)
Got the back half of the interior all buttoned up. Scott Rod Rear bulkhead and Scott rod rear seat delete look awesome!!
been doing some stereo wiring, nothing major. Not much more is going to be done because as most of you know i'm about to deploy again
Got most of the front suspension together but I discovered one of my caster camber plates is cracked. looks like the stupid body shop that did the alignment after it got hit torqued the SHIZ out of the bolts. so i have to get a new set (otherwise i could've put the car back on the ground)
Got the back half of the interior all buttoned up. Scott Rod Rear bulkhead and Scott rod rear seat delete look awesome!!
been doing some stereo wiring, nothing major. Not much more is going to be done because as most of you know i'm about to deploy again
sdsubzero4
Spring Valley, CA
Looking good. Cant wait to see it finished when you get back.
Well fellas, the parts are starting to pile up back home! I'm having withdrawals beings away from my cars and the wicked stangs family! See you all in the fall
sdsubzero4
Spring Valley, CA
Take care of yourself out there.
we are waiting for your return.. Stay safe..
Well just a little update of sorts. Here's the list of parts I have sitting at home:
-heavily ported black super Vic intake
-aerospace 4 piston pro street front brakes
-complete nitrous plate kit w/ purge, heater, remote bottle opener etc.
-31 spline spool
-4:10 gear set
-grant steering wheel
-team z rear springs powder coated chrome
-custom FTI cam 624 int, 580 exh, 111* lobe seperation
-canton 7 qt pan w/pickup/ dipstick.
-various fuel system pieces
-various new exterior trim
I'm sure I'm forgetting quite a bit, but bottom line, this thing is getting finished when I get back!
-heavily ported black super Vic intake
-aerospace 4 piston pro street front brakes
-complete nitrous plate kit w/ purge, heater, remote bottle opener etc.
-31 spline spool
-4:10 gear set
-grant steering wheel
-team z rear springs powder coated chrome
-custom FTI cam 624 int, 580 exh, 111* lobe seperation
-canton 7 qt pan w/pickup/ dipstick.
-various fuel system pieces
-various new exterior trim
I'm sure I'm forgetting quite a bit, but bottom line, this thing is getting finished when I get back!
Are you selling parts?Well just a little update of sorts. Here's the list of parts I have sitting at home:
-heavily ported black super Vic intake
-aerospace 4 piston pro street front brakes
-complete nitrous plate kit w/ purge, heater, remote bottle opener etc.
-31 spline spool
-4:10 gear set
-grant steering wheel
-team z rear springs powder coated chrome
-custom FTI cam 624 int, 580 exh, 111* lobe seperation
-canton 7 qt pan w/pickup/ dipstick.
-various fuel system pieces
-various new exterior trim
I'm sure I'm forgetting quite a bit, but bottom line, this thing is getting finished when I get back!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've got quite a bit of stuff for sale. Most of the big ticket items are gone. What do you need?
upper and lower intake..
I've only got a stock set on the shelf.
Well fellas I'll be home next week :D I think my wife is sick of the boxes of parts piling up at home. She says there's really no more walking space in the garage lol.
If everything goes according to plan, the beast will be complete sometime early January. With the exception of some small odds and ends, I have everything she needs to put it back together. Stay tuned!
If everything goes according to plan, the beast will be complete sometime early January. With the exception of some small odds and ends, I have everything she needs to put it back together. Stay tuned!
Well fellas I'll be home next week :D I think my wife is sick of the boxes of parts piling up at home. She says there's really no more walking space in the garage lol.
If everything goes according to plan, the beast will be complete sometime early January. With the exception of some small odds and ends, I have everything she needs to put it back together. Stay tuned!
If everything goes according to plan, the beast will be complete sometime early January. With the exception of some small odds and ends, I have everything she needs to put it back together. Stay tuned!
ST3RL1NGY3LLOW
Lone Wolf
Uh-oh, look out guys! He's ready to tear up the competition at the upcoming Mustangs vs the World 8 on March 7th.
Made some progress today. Just jumpin around a little to stay entertained lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Brakes are on 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
wickedbird
Well-Known Member
damn....... i might need to go change my shorts
Lol thanks man. Got a lot of work left but she's comin along
Sent from my iPhone using Tapatalk